Installation guide

A
A-4 Troubleshooting
In Network Setup, when you configure the IPX (Novell) connection, the
Fiery EX2101 queries the network for Novell file servers and trees, and attaches to
them temporarily. If a guest login is enabled, it will be used. If not, you are prompted
to log in from Command WorkStation.
If the selected NetWare file server or tree does not have a guest account, or if the guest
account has expired or been disabled by the NetWare supervisor, you will be prompted
to notify the IPX (Novell) administrator. In that case, there are two options:
•Enable a guest account on the NetWare server or tree for the purpose of setup.
• Log in with a different account. At the ENTER LOGIN NAME screen, change the default
name (guest) to supervisor or enter another valid login name. When you are
prompted for a password, enter the correct password for the account you named.
For any Novell error, make sure:
•Your IPX (Novell) network is connected to the Fiery EX2101.
• The NetWare server you are trying to access is running.
Add Server, Enter Your Login
Name, Enter Your File Server
Password
(Network Setup>Service
Setup > PServer Setup >
Bindery Setup)
No NetWare print
server found.
No print server was found when Fiery EX2101 queried the
file server you selected.
You must configure a print server and a print queue for
every NetWare file server that will handle Fiery EX2101
print jobs (see “Configuring a NetWare server for printing”
on page 2-10).
Any Bindery Setup screen Novell error code, followed by
a message.
Novell NetWare has reported an error.
Command WorkStation reports the error number and dis-
plays a brief message.
For the most common errors (listed in the following table),
a screen is displayed that allows you to retry the action that
evoked the error, such as adding a server. If that is
not possible, you are prompted to notify the Novell admin-
istrator, who will need to troubleshoot the network.
Consult NetWare Administrator documentation for fur-
ther explanation of Novell error codes.
After this Setup screen This message Means