Installation guide

3
3-13 Managing job flow
The availability of each command varies, depending on the context of the selected job.
In addition to choosing these commands from the Actions menu, you can issue them
from context-sensitive menus. Activate the Print, Hold, and Process and Hold
commands using the Action buttons.
The following table describes job management commands in greater detail and
explains how each command affects the raster data associated with a job:
Choose this command To do this Raster data is
Print Prints the selected job in the Active Jobs
window, Printed Jobs panel, FreeForm
panel, or Archive panel.
Temporarily held on the Fiery EX2101 until
the job completes printing.
Hold Holds the selected job waiting to process in
the Active Jobs window, or the selected job
in the Printed Jobs or Archive panel, and
marks the job with either the spooled/held
flag or the processed/held flag.
If raster data is included with the job, held
on the Fiery EX2101 hard disk indefinitely.
Process and Hold Processes the selected job in the Active Jobs
window, Printed Jobs panel, or Archive
panel, and holds a copy of the job. The
copied job is marked with the processed/
held flag.
Held on the Fiery EX2101 hard disk
indefinitely.
Print and Hold Prints the selected job in the Active Jobs
window, Printed Jobs panel, or Archive
panel, and holds a copy of the job. The
copied job is marked with the processed/
held flag.
Held on the Fiery EX2101 hard disk
indefinitely.
Remove Raster Data Removes the raster data associated with the
selected processed/held job in the Active
Jobs window, or with the selected raster job
in the Printed Jobs or Archive panel. Leaves
the original PostScript or PCL data in place.
Deleted.