Installation guide

8
8-4 Using FieryBar
Starting and shutting down the Fiery EX2101
Generally, you can leave the Fiery EX2101 running all the time. This section describes
how to shut down and restart the Fiery EX2101 when necessary.
TO START THE FIERY EX2101
1. Press the power button on the front of the Fiery EX2101. If the copier is also turned
off, turn it on before turning on the Fiery EX2101.
2. At the Log On to Windows prompt on the monitor, keep Administrator in the user
name field, enter Fiery.1 in the password field, and press Enter.
3. Allow FieryBar to appear and reach Idle on the monitor.
When FieryBar displays Idle, you can enter Fiery EX2101 Setup by right-clicking
FieryBar and choosing Set Up Fiery from the menu that appears.
The Setup dialog box includes the following tabs:
For information about the Setup options, see the Configuration Guide.
Click To do this
General Setup Configure the General Setup options.
Network Setup Configure the Network Setup options.
Printer Setup Configure the Printer Setup options.