Installation guide

1
1-24 Printing from Windows Computers
TO PRINT A CUSTOM PAGE SIZE WITH THE WINDOWS NT 4.0
POSTSCRIPT PRINTER DRIVER
1. Choose Print from your application.
2. Select the Fiery EX2101 PS as the printer and click Properties.
3. Click the Fiery Printing tab, and then click the Paper Source print option bar.
4. Choose Tray 5 from the Paper Source menu.
5. Choose PostScript Custom Page Size from the Page Size menu.
6. Click the Layout print option bar and select a setting from Orientation that reflects
the way the custom size paper is loaded.
7. Click OK, and then click OK again to print the job.
Working with custom page sizes in the Windows 2000/XP/2003
PostScript printer driver
With custom page sizes, you define the dimensions of a printed page. When you define
a custom page size, you can use it from an application without redefining it each time
you print.
NOTE: Windows 2000/XP/2003 have a similar interface when setting options and
printing. The following procedures use Windows 2000 illustrations with Windows
XP/2003 differences noted.
TO DEFINE A CUSTOM PAGE SIZE WITH THE WINDOWS 2000/XP/2003
POSTSCRIPT PRINTER DRIVER
1. Click Start.
2. Windows 2000: Choose Settings and then Printers.
Windows XP: Choose Printers and Faxes.
Windows Server 2003: Choose Settings and then Printers and Faxes.
3. Right-click the Fiery EX2101 PS icon and choose Printing Preferences.
4. Click the Paper/Quality tab.