Installation guide

A
A-10 Print Options
More about print options
The following sections provide additional information about print options. For more
information on the settings, requirements, and constraints in effect for these options,
see the preceding table.
Booklet Maker
Use this option to arrange the pages of your print job in special layouts for folding or
cutting after printing.
Off—The job is printed without any imposition features.
Standard Booklet—Choose this setting to print entire documents that are folded and
stacked in booklet order.
You can also adjust the image shifting that may occur when printing booklet jobs by
using the Creep Adjustment option. For more information, see “Creep Adjustment”
on page A-13.
Use Master
None
/1-15
For variable data print jobs, specify a
FreeForm master number to be used for
the job.
For more information, see page 5-2.
Command WorkStation allows you to
select up to 100 FreeForm Masters.
For more information on creating
FreeForm masters in Command
WorkStation, see the Job Management
Guide.
This option is not available in the PCL
printer driver.
Option and settings
(default setting is underlined)
Description
Requirements, constraints,
and information
Front Back