User manual

Configuration 13
Configuration
With Source Four Revolution, you decide how to configure your light. The standard base
unit provides pan, tilt, beam-edge change, 15-35° zoom range, two Blank Modules, Internal
Media Frame, integrated color scrolling, and on-board dimming. The unit’s module bays
can be filled with any of the modules described below.
Blank Module (BM)
• Space for one static metal M-sized gobo
Iris Module (IM)
• 18-leaf iris
• Smooth operation
• Simple, repeatable beam-size control
• On-board auto-sensing electronics
Shutter Module (SM)
• Multi-plane shutters for flexible beam shaping
• All shutters have +/– 45° rotation (total range of motion = 90°)
• On-board auto-sensing electronics
Static Wheel Module (SWM)
• Four positions, typically setup as three positions plus open
• Gobos or dichroic color filters
• Uses M-sized gobos, glass or metal
• On-board auto-sensing electronics
Rotating Wheel Module (RWM)
• Three positions, plus open
• Rotating, indexable gobos
• Uses M-sized gobos, glass or metal
• On-board auto-sensing electronics
Module/Bay Compatibility
Module Type Front Bay Rear Bay
Blank Module (BM) Yes Yes
Iris Module (IM) Yes Yes
Shutter Module (SM) No Yes
Static Wheel Module (SWM) Yes Yes
Rotating Wheel Module (RWM)
Recommended for
best performance
Not
Recommended
a
a) Prolonged use of the Rotating Wheel Module in the Rear Bay may cause the belt within the module
to degrade. To ensure peak performance of the RWM, use it in the Front Bay.