System information

UNISON MOSAIC REMOTE INPUT/OUTPUT MODULES (RIOS)

www.etcconnect.com/RIO

Expand your reach. The Mosaic Remote Input/Output Modules (RIOs)

expand the advanced show-control capabilities of the system in

interactive installations, allowing lighting and AV to respond instantly

to the environment or viewer. All three RIO devices offer an integrated,

bi-directional serial port (RS232/RS485) for interfacing to third-party

equipment, and use reliable Ethernet-wiring with IEEE 802.3af Power-

over-Ethernet (PoE).

RIO 8/0

When you need to accept discrete triggers from third-party equipment

to complete your system, choose the RIO 8/0. Featuring eight

configurable Tri-Mode inputs, the RIO 8/0 accepts almost any input

from the necessary equipment.

RIO 4/4

When you need both input triggers and control over other devices in

the same location, choose the RIO 4/4. Featuring both relay outputs

and configurable Tri-Mode inputs, the RIO 4/4 allows you to integrate

with almost any third-party device.

RIO 0/8

When you need to issue commands to third-party devices (such as

building-automation and alarm systems, effects controllers and

automata), rely on the RIO 0/8 with eight fully isolated relay outputs.

UNISON MOSAIC 1 AND 2 EXPANSION MODULES

www.etcconnect.com/mosaicexpansion

Beyond the box. The Mosaic Show Controllers

™

1 and 2 offer many

built-in interface options. When those are not enough, you can add

on up to two Mosaic Expansion Modules per MSC1 or 2

–

each

specific to a protocol or purpose.

The Mosaic DMX Input Expansion Module allows you to configure

DMX channels as triggers for intensity or color control.

The Mosaic RS485 Expansion Module allows you to communicate

bi-directionally with third-party show-control and automation devices.

Harness the power of RealEngine with the Mosaic Audio Expansion

Module and manipulate intensity, color, and timeline playback for

sound-to-light effects.

The Mosaic Timecode Expansion Module reads all Linear Time

Code (LTC) formats so that you can synchronize your design with

audiovisual or show-control equipment.

Control up to 128 Digital Addressable Lighting Interface (DALI) ballasts

per Mosaic Show Controller with the Mosaic DALI Master Expansion

Module or use the DALI protocol to trigger one or more Mosaic Show

Controllers with the Mosaic DALI Slave Expansion Module.