System information

SENSOR3 INSTALLATION RACK AND CEM 3

www.etcconnect.com/sensor3installrack

SENSOR3 INSTALLATION RACK

6-, 12-, 24-, and 48-module configurations

6- to 96-dimmer configurations

Front-access installation with easily accessible line, load and

control terminations

Innovative bussing design

Single- or three-phase operation (SR48 is three-phase only)

100V, 120V, and 230V versions, 50/60Hz

Neutral Connect (GFCI) and Delta versions available

100,000A Short Circuit Current Rating (SCCR)

UL924 Listed for Bypass Operation

Optional ETC SmartLink Power Board provides architectural control

Compatible with ETC DimStat

™

when populated with CEM3 module

CEM3 CONTROL MODULE

Works with any Sensor dimmer rack or pack

Back-lit LCD display and 6-button keypad

Direct Ethernet control signal input as well as two DMX inputs

(ETCNet2 or Net3/ACN native device)

128 Presets with programmable fade times configurable

across four rooms

Emergency/ Panic interface

Supports Advanced Features (AF) option

Supports ETC Dimmer Doubling

Existing Sensor racks are upgradeable

Compatible with ETC DimStat

16-bit control option

SENSOR DIMMER MODULES

www.etcconnect.com/sensor3dimmers

Variety of modules to meet all needs

10 to 100A ratings

350, 500, or 800µ risetimes

GFCI and Delta modules available

Sensor3 Power Control