Specifications

Rigging confidence with the touch of a button. No other
rigging control systems at this level offer such extensive
operational and safety-feedback features. QuickTouch
®
, QuickTouch+
®
and Foundation
™
controls are the command centers
of ETC Rigging. These systems activate and monitor the lifting functions of Prodigy
®
fixed- and variable-speed hoists and
system safety features. Each controller logs the use of the entire hoisting system and the behaviors of each hoist, while
providing diagnostics on itself and the entire hoisting system. If a fault occurs, hoists communicate the type and location
of the fault via the controller’s LCD screen. As a safety backup, hoist functionality is limited during a fault condition. The
controller also tracks the system’s annual-inspection schedule, and records the usage of each hoist (moving distance,
peak loads, and fault conditions since install and last inspection). QuickTouch, QuickTouch+ and Foundation produce
inspection reports that can be transmitted to archives at ETC, ensuring that required inspections occur, while reporting
problems or misuse.
OVERALL FEATURES
ETC Rigging
™
control systems
90
www.etcconnect.com
Simple and intuitive operation
Self-test and safety check at each turn-on
Annual inspection-alert message
Hoist-usage statistics and log files
Automatic inspection report generated as pdf
Hold-to-run controls
Hard-wired E-stop and dead-man circuits
Simple wiring topology requires no auxiliary contactor
cabinets
– one control cable between hoist(s) and
control stations
Completely quiet – no fans, no spinning hard drives
Optional multiple E-stop locations
Optional handheld remote control