Specifications

MOSAIC LED DRIVERS
www.etcconnect.com/mosaicleddrivers
Mosaic LED drivers can be used with any DMX controller for direct
and efficient control of single-color LED fixtures. With options for both
constant current and constant voltage, you can get the right tool to
work with your power supply.
The Mosaic Constant Current LED Driver (LED-C) provides six channels
of LED control for constant-current fixtures. The Mosaic Constant
Voltage LED Driver (LED-V) provides six channels of LED control for
constant-voltage fixtures. Each can be paired with a standard power
supply to power both the LED driver and the connected fixtures.
The LED drivers offer one power supply input and DMX in and thru,
creating six discrete outputs to LED fixtures. Constant-current modules
offer a variety of outputs
– 350mA, 500mA and 700mA – with inputs
from 15 to 48Vdc. Constant-voltage modules run 12 to 24Vdc with
a maximum channel output of 40W (180W total power). These
compact drivers fit any installation. They feature manual and
automated addressing, fixture test modes, standard DMX protocol,
support RDM configuration, and are convection cooled.
These DIN-rail-mounted drivers are the perfect accessory for any
Mosaic control system.
78
www.etcconnect.com
MOSAIC BUTTON STATIONS
www.etcconnect.com/mosaic
Mosaic Button Stations (BPS) interface with any Mosaic Controller
(MSC, MSCX, and MTCP) over a standard Power-over-Ethernet
network. With support for up to 100 stations in a single system,
button stations can be placed remotely to trigger any system action
or timeline. Simple addressing using a rotary switch is provided on the
rear of the station, and Mosaic Designer software is used to assign
button actions and LED indicator responses. With faceplates for North
America and Europe, the button stations are available in finishes of
white, cream, black, or black with an aluminum bezel, to complement
your décor. Or, go your own way: Design your own look by choosing
the clear acrylic version with a customizable insert.