User manual

61 Sensor+ CEM+ Configuration Manual
if error
ETC CEM+ R__/__ G__
About
ETC CEM+ R__/__ G__
[Rack OK]
View Error [Y of XX]
[No Data Port A]
Yes
About Group
Rack Power
About Group
Panic >inactive<
About Group
[Group Name]
About Rack Power
60.0 Hz SINGLE_PHASE
About Group
SW >1.0.0.9.0.42<
About
Network
About Gateway
[www.xxx.yyy.zzz]
About Subnet Mask [www.xxx.yyy.zzz]
About IP Address
[www.xxx.yyy.zzz]
About Rack Power
V a:123 b:125 c:126
Voltage Headroom
VH a:20 b:16 c:19
Rack Data
About
Rack General
About NNNNNNNNNNNNN
Amb > 75<F Air>OK<
About NNNNNNNNNNNNN
Type: SR48
About
Dimmer
About Dimmer
Select Dimmer [xxxxx]
About Dimmer >xxxxx<
Rec >xxx< Act >xxx<
About Dimmer >xxxxx<
Type >D20AF<
About Dimmer >xxx< Curve >Mod-Square<
About Dimmer
Max Voltage >115<
About Dimmer >xxx<
Level >yy%<
About Dimmer >xxx<
Source >EDMX<
About NNNNNNNNNNNNN Clean Set:[128] hrs
Select Rack >1</16
[Rack Name]*
About NNNNNNNNNNNNN
About NNNNNNNNNNNNN
Select Rack >1</16
[Rack Name]*
Select Rack >1</16
[Rack Name]*
Select Rack >1</16
[Rack Name]
ETC CEM+ R__/__ G__
[Rack Error(s)]
no
Home (<<) to Exit
About Dimmer >xxx<
Rack rr Circuit cc
About
Identify Rack
Select Rack >1</16
[Rack Name]*
About
Rooms & Presets
Room 1 dimmers >dimmer xxxxx<
Room1 Presets
>NNNNNNNNNNNNNN<*
Select Room >x<
[Rack Name]*
About NNNNNNNNNNNNN Clean Due:[128] hrs
About
Rack Address
Select Rack >1</16
DMXA[std] start[___]
About Rack Data
DMX A:OK DMX B:OK
About Rack Data
EDMX: OK
Select Rack >1</16
DMXB[std] start[___]
Rack Errors About Menu