User manual

19 Sensor+ CEM+ Configuration Manual
Add Racks
This page is where you add racks to your configuration.
To change the rack and module types to the European models, click the 240V check box.
After checking 240V, you must click Save Changes before you will see the available rack
and module types change to European (ESR/ESP) models. Clicking Save Changes the
first time after the 240V check box has been altered (checkmark vs. no checkmark) will not
add a rack to the group.
Rack #
Status
This page displays the individual rack’s power information, the dimmers’ control source and
current intensity level.
First dimmer of the
first added rack.
Enable Advanced
Features for added
racks.
240V changes the available rack & module
types to European models. (Read below)
Set initial patch
mode.
Set ambient
temperature alarm.
Set the default
module type
Set the dimmer
balancing type
Displays which
rack’s info you are
viewing which may