User manual

chapter 7 track 85
When you insert a cue with [Track], new channels track through the cues
after it until Insight 2x encounters a cue with a level previously recorded
for that channel.
Pressing [Track] (rather than [Record] as in the previous example) then
[1][.][1] [Enter] to insert and record the same cue 1.1 as above produces
the results illustrated in Figure 5 . Compare it to the results illustrated in
Figure 4, in which the same cue was inserted using [Record] rather than
[Track].
Chan 1 Chan 2 Chan 3 Chan 4 Chan 5
Cue 1 50
Cue 1.1 50 50
Cue 2 50 FF 50
Cue 3 50 FF FF 50
Cue 4 25 FF FF FF
Cue 5 00 00 00 00
Figure 5
Channel 4 creates a track from the cue after 1.1 until a pre-recorded level
interrupts it.