User manual

84 Insight 2x user manual
Inserting cues
If you insert a cue in this sequence, Record and Track produce different
results . Record saves changes only in the cue you insert; Track saves the
changes you make and tracks them through the following cues .
The following keys were pressed to release captured channels and play
back cue 1 . With cue 1 in a fader, channel 4 is added at 50 percent . The
new look is inserted as cue 1.1.
[Stage] [Rel] [Rel] Release captured channels.
[Cue] [1] [Go] Play back cue 1.
[Chan] [4] [At] [5][0] Add channel 4 at 50 percent.
[Record] [1][.][1] [Enter] Inserts new look as cue 1.1.
Figure 4 displays the result inserting the cue using [Record]
. Notice the
new channel is not added to the cues that follow it.
Chan 1 Chan 2 Chan 3 Chan 4 Chan 5
Cue 1 50
Cue 1.1 50 50
Cue 2 50 FF 00
Cue 3 50 FF FF
Cue 4 25 FF FF FF
Cue 5 00 00 00 00
Figure 4
Note that Insight 2x enters a level of 00 percent for channel 4 in cue 2 .
This fades channel 4 out when cue 2 is played.