User manual

chapter 7 track 83
If you change the level in the beginning or middle of a track, you may want
the change to continue through the remainder of the original track . To
track the level modification we just recorded in the example above, use
[Track] instead of [Record] to modify channel 1. Press [Track], enter cue
number, and press [Enter] . If you use [Track] rather than [Record] to record
the changes made to the cue illustrated in Figure 1, the results will be as
illustrated in Figure 3 (versus the results from using [Record] illustrated in
Figure 2).
Chan 1 Chan 2 Chan 3 Chan 4 Chan 5
Cue 1 50
Cue 2 50 FF
Cue 3 50 FF FF
Cue 4 25 FF FF FF
Cue 5 00 00 00 00
Figure 3
The modified level is recorded in the current cue and carries through the
entire track (cues 1 through 3).