User manual

82 Insight 2x user manual
Recording modified cues
The difference between Record and Track is apparent when you modify a
cue or insert a new cue between two existing cues . Record and Track pro-
duce different results.
The following keys were pressed to release captured channels and play
back cue 1 .
[Stage] [Rel] [Rel] Release captured channels.
[Cue] [1] [Go] Play back cue 1.
[Chan] [1] [At] [5][0] Modify channel 1 to 50 percent.
With cue 1 in a fader, channel 1 is modified to 50 percent
. To change a
channel level that affects only the cue you modify, use [Record] . Modify
the cue; press [Record]; enter the cue number, and press [Enter] . Only the
current cue is modified . The track that encompasses the channel is inter-
rupted but continues in the following cues at the originally tracked level.
The results of modifying cue 1 and using [Record] are illustrated in Figure
2.
Chan 1 Chan 2 Chan 3 Chan 4 Chan 5
Cue 1 50
Cue 2 FF FF
Cue 3 FF FF FF
Cue 4 25 FF FF FF
Cue 5 00 00 00 00
Figure 2
Note that channel 1 is not affected in cues 2 and 3 . Also note that when
you record a modified cue that is in a playback fader, the changes are
reflected in the fader . That is, when you release the channels you have
modified, they remain on stage.