User manual

chapter 7 track 81
Using record to create tracks
In Stage mode, the following keystrokes create the five cues illustrated
below . Each cue adds channels to the previous cue . The example uses
[Record] to record the cues .
Cue 1 [Chan] [1] [Full] [Record] [1] [Enter]
Cue 2 [Chan] [2] [Full] [Record] [2] [Enter]
Cue 3 [Chan] [3] [Full] [Record] [3] [Enter]
Cue 4 [Chan] [1] [At] [2][5] [Chan] [4] [Full] [Record] [4] [Enter]
Cue 5 [Chan] [1] [Thru] [4] [At] [0][0] [Record] [5] [Enter]
These keystrokes produce the results illustrated in Figure 1.
Chan 1 Chan 2 Chan 3 Chan 4 Chan 5
Cue 1 FF
Cue 2 FF FF
Cue 3 FF FF FF
Cue 4 25 FF FF FF
Cue 5 00 00 00 00
Figure 1
Notice the vertical tracks that develop when a channel remains at the
same level through a number of cues . For example, channel 1 tracks from
cue 1 to cue 3 . When a channel is not set at any level (such as channel 5
above) it is considered tracked at clear.