User manual

74 Insight 2x user manual
Deleting cues
Follow these steps to delete a cue in Stage or Blind mode.
For more information on tracking, see
Chapter 7, Track , page 79.
Copying cues
In some cases, you may want to copy a cue’s channel levels and use them
as the foundation for a new cue . To copy cue, follow these steps:
Note: You may also copy a look from a cue to a submaster or a group. To
do so, press [Sub] or [Group] in place of [Cue] in step 5.
Keystrokes:
Action:
1. Press [Stage] or [Blind]. If
you press [Stage], press
[S7], More Softkeys.
Selects display mode
2. Press [S6], Delete in
Stage, Delete Cue in
Blind).
Prompt reads:
To Delete cue, press ENTER - Delete
cue and tracking, press TRACK +
ENTER
To cancel, press CLEAR
3. Enter number of cue to
delete. This is optional if
you wish to delete the cur-
rently selected cue.
Selects cue to delete
4. To delete just the current
cue, press [Enter].
To delete the current cue
and any channels that track
from that cue, press
[Track] [Enter] .
Prompt reads:
To confirm, press ENTER
To cancel, press CLEAR
5. Press [Enter]
Deletes cue
Keystrokes:
Actions:
1. Press [Stage] or [Blind].
Selects display mode
2. Press [Cue] [1].
Prompt reads:
Select cue number
To select cue type, press TYPE
3. If you are in Stage display,
press [Go].
4. Press [Record].
Prompt reads:
To record cue, select number and
press ENTER
To cancel, press CLEAR
5. Press [Cue] [2].
Corner reads: Cue 2
6. Press [Enter].
Cue copy is complete. Channel levels
have been copied from cue 1 to cue 2.
You can now modify the new cue