User manual

72 Insight 2x user manual
Using Update to add channels to a cue
Normally when you re-record a cue, you record all the channel levels cur-
rently on stage. Insight 2x’s Update feature allows you to record only
those channels that you specify.
This allows you to add specific channels to the active cue, then re-record
the cue without recording the entire stage look.
Follow these steps to use Update to modify a cue in Stage mode:
Note: Press [Track] instead of [Enter] in step 7 if you wish changes to track
into subsequent cues.
Keystrokes:
Action:
1. Press [Stage].
Selects Stage display mode
2. Press [Cue], enter cue
number and press [Go].
Plays back selected cue, bringing up
its current levels
3. Modify or add channel
levels as desired.
4. Press [S2], Update.
(If you wish to update the
levels in a cue other than
the active cue, enter the
desired cue number.)
Prompt reads:
To update cue, select number and
press ENTER
(TRACK + ENTER for tracking)
To cancel, press clear
5. Press [Channel].
Prompt reads:
To update channel(s), select
number(s) and press ENTER
To cancel, press clear
6. Enter the channel num-
ber(s) you wish to add to,
or update in, the cue.
7. Press [Enter]
or...
Press [Track] [Enter].
Updates and re-records the active cue