User manual

chapter 6 cues 71
Using Update to modify channels in a cue
The Update feature allows you to easily record changed levels on Stage
into a selected cue. You may record all levels on Stage into the cue, or you
may record only changes to channels that were previously recorded in the
cue. This allows you to modify the channel levels in the active cue, then
re-record the cue without recording the entire stage look.
Note: Levels provided by submasters aren’t updated. Only channel levels
set on the keypad are recorded.
Follow these steps to use Update to modify a cue in Stage mode:
Note: Press [Track] after you press [S2], Update, if you wish changes to
track into subsequent cues.
Keystrokes:
Action:
1. Press [Stage].
Selects Stage display mode
2. Press [Cue], enter cue
number and press [Go].
Plays back selected cue, bringing up
its current levels
3. Modify channel levels as
desired.
4. Press [S2], Update.
(If you wish to update the
levels in a cue other than
the active cue, enter the
desired cue number.)
Prompt reads:
To update cue, select number and
press ENTER
(TRACK + ENTER for tracking)
(Press ONLY + ENTER to update
only those channels already in cue)
5. To record changes only to
channels that are already in
the cue, press [Only].
Limits update to channels in cue
6. Press [Enter]
or...
Press [Track] [Enter].
Updates and re-records the active cue