User manual

60 Insight 2x user manual
Recording a cue in Stage
In this cue, you will only set channel levels. Default settings will determine
all other attributes of the cue. You can change most default settings from
the System Settings menu. See Chapter 3, Entering system settings , for
information about setting and changing defaults.
Follow these steps to record cue 1:
Note: The keypad defaults to cue mode when you press [Record].
Keystrokes: Action:
1. Press [Stage]. Selects Stage display mode
Prompt reads:
Select channel numbers
2. Press [1] [Thru] [1][0]. Selects channels 1 through 10
3. Press [At]. Prompt reads: Enter intensity
4. Press [5][0]. Sets a level of 50 percent for channels
1 through 10
5. Press [Record]. Prompt reads:
To record cue, select number and
press ENTER
To cancel, press CLEAR
6. Press [1]. Selects cue 1
7. Press [Enter]. Records cue 1 containing channels 1
through 10 at 50 percent
8. Press [Rel]. Releases captured channels