User manual

58 Insight 2x user manual
Creating cues
Insight 2x allows you to save up to 600 cues per show. A cue is a look you
have created and recorded, and can replay in a timed fader pair. If your
show requires more than 600 cues, you can read a second show from dis-
kette during a break, or between cues . See Chapter 17, Diskette func-
tions, for more information about recording shows on diskette .
This chapter includes instructions and examples for creating and modify-
ing cues using several different methods. If you follow the examples, you
will have several cues recorded . You will also know how to modify, copy
and delete cues.
If you have several cues already stored, you may want to use the look
from one cue and modify it to create another
. In other circumstances, you
may want to enter all channel levels manually.
There are several ways you can go about creating any one look . The fol-
lowing instructions give examples of how you could generate each cue.
Note: Before you clear cues, as described below, make sure that the
show currently in the console memory is saved on diskette.
The examples in this chapter assume there are no cues stored in the con-
sole . To erase any cues, press [Setup] [4] [Enter] [2] [Enter] [Enter].
Viewing cues
You can view stored cues in two ways, live in Stage mode, or just on the
screen in Blind mode.
To view cues live, you must select the cue and play it back in a fader. See
Chapter 9, Playing back cues, for instructions.
To view a cue only on the screen, select Blind mode and enter the desired
cue number . To view a different cue, press [Cue] and the new cue number
that you want to see .
In Blind mode you can also use [+] and [–] to move through recorded cues,
and cue parts, one at a time . Press [Cue]; then press [+] to display the next
cue or part; press [–] to display the previous cue or part.