User manual

48 Insight 2x user manual
Labeling a channel
The Channel Attributes display’s Label function allows you to assign an
alphanumeric label of up to 16 characters to a channel.
To label a channel, follow these steps:
Keystrokes:
Action:
1. Press [Setup].
Selects Setup menu
2. Press [1][1] [Enter].
Selects Channel Attributes display
Prompt reads:
Select channel number(s)
3. Enter channel number(s)
to label and press [Label].
Use [Thru], [And] and
[Except] to select multiple
channels.
Selects channel to label
Prompt reads:
Type channel label
(F6 = clear to end,
F7 = last channel label,
F8 = next channel label)
4. Use an alphanumeric key-
board to enter the chan-
nel’s label, then press
[Enter].
Channel is labeled