User manual

46 Insight 2x user manual
Independent channels
An independent channel is not affected by the Grandmaster, Blackout,
Solo, or Flash. Otherwise, independent channels function normally. Use
[S1], Independent, to make a channel independent. Press [Rel] three
times to release all independent channels.
Channels that control movement of moving lights or color scrollers will
often be set as Independent. This assures that in the case of a blackout or
change in the Grandmaster setting, the position of the moving light or
color scroller will not change.
To mark a channel as independent, follow these steps:
Keystrokes: Action:
1. Press [Setup]. Selects Setup menu
2. Press [1][1] [Enter]. Selects Channel Attributes display
Prompt reads:
Select channel number(s)
3. Enter channel number(s)
to be independent and
press [S1], Independent.
Use [Thru], [And] and
[Except] to select multiple
channels.
Selects channel
Prompt reads:
Enable/disable independent
channel(s) (1 = Enable, 0 = Disable)
4. Press [1], then press
[Enter].
Channel is independent