User manual

chapter 4 patch 39
About Dimmer with ETCLink
If your console uses ETCLink to monitor dimmers in an ETC Sensor dim-
ming system, the About Dimmer window displays additional dimmer
monitoring information. The following expanded About Dimmer window
appears if dimmer monitoring is enabled.
• Label: The dimmer’s label.
• Channel: The channel to which the dimmer is assigned.
• Proportion: The dimmer’s assigned proportional level.
• Profile: The dimmer’s assigned profile.
• Console dimmer level: The dimmer output level the Insight 2x
con-
sole is sending to the dimmer.
• Parked: Whether or not the dimmer is parked.
• Rack/Slot number: The rack and slot in which this dimmer is located.
• Rack dimmer level: The actual output level at which the dimmer is
set.
• Dimmer level source: The source of the control signal which set the
dimmer’s level. Possible sources include:
DMX A
DMX B
Rack #
The following information is available on Sensor Advanced Features dim-
ming systems.
• Recorded lamp load: The load at which the selected dimmer was re-
corded.
• Load at full: The estimated load on the dimmer when the level is at
Full.
• Actual load: The actual load currently on the dimmer.
• Boost: The dimmer’s boost level, if any.
• Dimmer error: Current dimmer errors, if any.