User manual

34 Insight 2x user manual
Labeling dimmers
Insight 2x allows you to assign alphanumeric labels to your dimmers.
Dimmer labels may be up to five characters long and may consist of any
combination of characters, including letters, numbers and symbols.
In the Patch display, Insight 2x allows you to view labels you have
assigned to dimmers. Press [S8], Show/Hide Labels, to reveal or hide
the labels. Hiding labels provides space to show additional dimmers.
This example demonstrates how to assign a label to a dimmer:
Note: In step 4, if you wish to label another dimmer, press [F7] or [F8]
instead of [Enter]. Insight 2x records the current dimmer’s label, and
brings up the previous or next dimmer to be labeled.
Keystrokes:
Action:
1. Press [Patch].
Selects Patch display
2. Press [5] [Label].
Selects dimmer 5 to label
Prompt reads:
Type dimmer label
(F6 = clear to end,
F7 = last dimmer label,
F8 = next dimmer label)
3. Use the alphanumeric key-
board to type “House.”
Corner reads: Label House
4. Press [Enter] on the Insight
2x keypad.
Dimmer 5 is labeled “House”