User manual

32 Insight 2x user manual
Proportional patching
Insight 2x allows you to proportionally inhibit the output of individual
dimmer levels from the Patch display. Dimmers output at 100 percent
unless you patch them at a lower level.
Dimmer intensity levels set in Patch function at full level on all other
screens . For example, if you enter a level of 60 for a dimmer on the patch
screen, when you set that channel to full in a cue or submaster, the
dimmer will output at 60 percent.
Follow these steps to assign a proportional dimmer output level:
Note: If the dimmer’s level is highlighted, white on red, you may use [+]
and [–] to adjust the level. Press [Enter] to record the edited level.
Keystrokes:
Action:
1. Press [Patch].
Selects Patch display
2. If the [Dim] LED is unlit,
press [Dim] to indicate that
the next number entered
will be a dimmer.
Prompt reads:
Select dimmer numbers, then press
ENTER to assign to a channel, or
press AT to assign a level, or press
PROFILE to assign a profile
3. Use the keypad to enter
the desired dimmer num-
ber(s). Use [And] and
[Thru] if you want to select
more than one dimmer.
Prompt reads:
Select dimmer numbers, then press
ENTER to assign to a channel, or
press AT to assign a level, or press
PROFILE to assign a profile
4. Press [At]
Prompt reads:
Select dimmer level
5. Use the keypad to enter
the desired maximum
output level for the dim-
mer(s). Full is displayed
until a new level is entered.
Enter a zero before single-
digit levels (i.e., 08).
Dimmer’s proportional level is set