User manual

chapter 4 patch 31
Patching dimmers to channels
Follow these steps to patch a dimmer(s) to a control channel:
Keystrokes:
Action:
1. Press [Patch].
Selects Patch display
2. Press [Dim]. (If the LED in
the [Dim] key is lit, you
may omit this step.)
3. Use the keypad to enter
the numbers of the dim-
mers you want to patch.
Use [And] and [Thru] if you
want to select more than
one dimmer.
Prompt reads:
Select dimmer numbers, then press
ENTER to assign to a channel, or
press AT to assign a level, or press
PROFILE to assign a profile
4. Press [Enter].
Prompt reads:
To assign dimmers, select channel
number, then press ENTER
To delete dimmers, press
UNPATCH
5. Enter the channel number
to which you want to patch
the selected dimmers and
press [Enter].
Dimmer(s) are patched to the channel
6. Repeat steps 2 through 4
to patch additional dim-
mers.