User manual

chapter 3 system settings 27
Naming show
You can use an alphanumeric keyboard to name the show currently
loaded in the console. The names you give shows can consist of letters,
numbers or the symbols: #, %, &, *, (, ), +, ‘, –, [, ], / as well as the comma
and period. You may enter the name using overwrite or insert mode. In
overwrite, you type over any previously entered characters; in insert
mode, each new character pushes the previously entered characters one
space to the right. Press [Insert] on the keyboard to switch between insert
and overwrite mode. See page 296 for information about installing an
alphanumeric keyboard.
To name the show in your system, follow these steps:
Keystrokes:
Action:
1. Press [Setup].
Selects Setup display
2. Press [S1], Show Name.
Prompt reads:
Type show label
(F6 = clear to end)
3. Enter the name you want
to give the show on the
alphanumeric keyboard.
The show name can have
up to 20 characters.
New name appears in corner of screen
4. Press [Enter] on the alpha-
numeric keyboard to
record the name, or press
[Esc] to quit and return to
Setup display.
Show is named