User manual

368 Insight 2x user manual
ETCLink Functions System Status Rack Status
1 - Enable/Disable ETCLink 1 - Multiplex 1 -
2 - A 2 - Play Backup 2 -
3 - B 3 - Record Backup 3 -
4 - 4 - 4 - System Status
5 - 5 - Dimmer Status 5 - Dimmer Status
6 - Unset Dimmer 6 - Rack Status 6 - Select Rack
7 - Set Dimmer 7 - 7 -
8 - Return →
Setup 8 - Return → ETCLink 8 - Return → ETCLink
Dimmer Status Load Management
1 - 1 - Print Screen
2 - 2 -
3 - 3 -
4 - System Status 4 - Load Check
5 - Select Dimmer 5 - Record Loads
6 - Rack Status 6 - Clear Loads
7 - 7 - Cancel
8 - Return →
ETCLink 8 - Return → ETCLink
Channel Attributes Link List
1 - Independent 1 - Link
2 - Flip 2 - X Channel
3 - Label 3 - Y Channel
4 - Previous Page 4 -
5 - Next Page 5 - Insert Link
6 - 6 - Delete Link
7 - Link List 7 - Move Link
8 - Return →
Setup 8 - Return → Attributes
SMPTE SMPTE 2 SMPTE 3
1 - Internal Clock 1 - Select Event 1 - Insert Event
2 - Clock Enable/Disable 2 - SMPTE Time 2 - Copy Event
3 - Manual Mode 3 - Cue 3 - Move Event
4 - Pause Mode 4 - Rate 4 - Previous Page
5 - Step 5 - Bump 5 - Next Page
6 - Learn Mode 6 - Macro 6 - Delete Event
7 - More Softkeys
→ SMPTE 2 7 - More Softkeys→ SMPTE 3 7 - More Softkeys→ SMPTE
8 - Return → Setup 8 - Reset Loop 8 - Sort
Real Time Programs Real Time Programs 2
1 - Select Program 1 - Insert Program
2 - Time 2 - Copy Program
3 - Days of Week 3 - Move Program
4 - Macro 4 - Previous Page
5 - Label 5 - Next Page
6 - Delete Program 6 -
7 - More Softkeys
→ RTC 2 7 - More Softkeys→ RTC
8 - Return → Setup 8 - Sort