User manual

364 Insight 2x user manual
Up Arrow
Use [↑] to move through various displays, such as Stage, Blind, effects
and macro mode.
Up/Down/Follow
Up/Down/Follow is softkey [S8] after [S7], More Softkeys, in the Blind
Subroutine display
Use [S8], Up/Down/Follow, to assign upfade and downfade times and
to specify amount of time to hold before beginning the next subroutine
step.
Example: [Step] [1] [S8], Up/Down/Follow, [2] [S8], Up/Down/Follow,
[4] [S8], Up/Down/Follow, [5] [Enter] assigns an upfade time of two sec-
onds and a downfade time of four seconds to step 1. Step 2 will start five
seconds after step 1 starts.
Update
Update is softkey [S2] in the Stage and Fader displays
Press [S2], Update, to re-record active submasters, cues and groups as a
selective record. Modified levels are recorded into the source and control
is simultaneously returned.
Example: [S2], Update, [Sub] [1] [Enter] records submaster 1 with any
modified channels originally controlled by submaster 1. Channel control is
restored to submaster 1.
Wait
Use [Wait] to hold the start of the upfade or downfade, to accomplish lag/
lead type cues. The first wait will hold the upfade, the second will hold the
downfade. The wait time (0 to 99:59) will begin counting when the cue is
activated.
Example: [Cue] [5] [Time] [6] [Wait] [6] [Enter] sets cue 5 to wait six sec-
onds before starting a six second upfade.
Example: [Cue] [7] [Wait] [Wait] [5] [Enter] sets cue 7 to wait five seconds
before starting the downfade.
X Channel
X Channel is softkey [S2] in the Link List display
Press [S3], X Channel, to select the X channels of a selected link.
Y Channel
Y Channel is softkey [S3] in the Link List display
Press [S2], Y Channel, to select the Y channels of a selected link.