User manual

chapter 3 system settings 25
Enable/disable Bump keys
Insight 2x’s submaster bump buttons may be enabled or disabled. Insight
2x defaults to enabled.
Follow these steps to enable or disable all submaster bump buttons:
Keystrokes:
Action:
1. Press [Setup].
Selects Setup display
2. Select [1], System Set-
tings, and press [Enter].
Selects System Settings menu
3. Select [1][4], Bump keys,
and press [Enter].
Prompt reads:
Enable/disable bump keys
(1 = Enable, 0 = Disable)
4. Press [1] or [0].
Corner reads:
BpStat 1
Or...
BpStat 0
5. Press [Enter].
Submaster bump buttons are enabled
or disabled