User manual

358 Insight 2x user manual
Sneak
Sneak is softkey [S1] in the Stage display
Use Sneak to return modified channels to the level provided by the faders
or submasters. Channels will fade in the Sneak time established in the
Setup menu unless a time is specified. Channels may also 'Sneak' to a
specified level
Example: [1] [S1], Sneak, [Enter]
Example: [1] [At] [7][5] [S1], Sneak, [Time] [5] [Enter]
Solo
Use [Solo] to clear non-selected channels. In Live mode, press again to
restore channels to previous setting.
Example: [Channel] [1] [Thru] [1][0] [Solo] sets the levels of all channels
other than channels 1 through 10 to zero.
Solo Bump
Press [Solo Bump] to put the submaster bump buttons into Solo mode.
The LED inset into the key lights to indicate that Solo mode is active. in
Solo mode, pressing any submaster bump button brings its channels to
their recorded level (or brings its channel to Full if in Channel mode) and
takes all other channels to zero.
Sort
Sort is softkey [S8] after [S7], More Softkeys, in the SMPTE and Real
Time Programs displays
Use [S8], Sort, to reorder SMPTE events or Real Time Programs by time.
The system will automatically conduct a sort when the mode is exited, or
when moving, copying or deleting events or programs.
Stage
The Stage display represents the current live channel levels as set by the
keypad, faders and submasters combined.
Step (Effect/Subroutine)
Step is softkey [S1] in the Blind Effect and Blind Subroutine displays
Press [S1], Step, to select a step or range of steps for modification.
Example: [S1], Step, [1] [Enter] selects step 1.
Example: [S1], Step, [5] [Thru] [9] [Enter] selects steps 5 through 9.
Step (SMPTE)
Step is softkey [S5] in the SMPTE Events display
Use [S5], Step, to execute the next SMPTE event in the event list. System
must be in SMPTE manual or pause mode.