User manual

appendix d reference 355
Reverse
Reverse is softkey [S3] in the Blind Effect Attribute display
Use [S3], Reverse, to cause the effect step list to run in reverse order,
beginning with the last recorded step. To cancel the reverse attribute,
press [S3] again.
Right Arrow
Press [→] to move through various displays, such as Stage, Blind, effects,
and macro mode.
Select Cue
Select Cue is softkey [S3] after [S7], More Softkeys, in the Blind
Subroutine display
Press [S3], Select Cue, to create or edit a fade step in a subroutine cue.
Select Dimmer
Select Dimmer is softkey [S5] in the Dimmer Status display
Use [S5], Select Dimmer, to select a specific dimmer on the Dimmer
Status display.
Select Event
Select Event is softkey [S1] after [S7], More Softkeys, in the Dimmer
Status display
Use [S1], Select Event, to select a SMPTE event or a range of SMPTE
events for modification.
Select Fader
Select Fader is softkey [S1] in the Fader display
Press [S1], Select Fader, to view the live output levels of the cues in the
A/B fader, the C/D fader, both faders, or the DMX In levels.
Select Group
Select Group is softkey [S1] in the Blind Group display
Use [S1], Select Group, to specify which group to edit or view.
Example: [Blind] [Group] [S1], Select Group, [6] [Enter] brings up group 6
for editing.
Select Macro
Select Macro is softkey [S1] in the Macro Editing display
Use [S1], Select Macro, to access a macro for recording or editing.
Example: [S1], Select Macro, [6] [Enter] selects macro 6.