User manual

354 Insight 2x user manual
Record Lockout
You may set the console to disable the Record function. This protects a
finished show from inadvertent changes.
To disable the Record function in your system, press [Setup] [1] [Enter]
[1][3] [Enter] [1] [Enter].
Recorded channels
Recorded channels are channel levels that have been recorded in a cue,
group or submaster . In Stage mode, recorded levels are displayed in
green or magenta . Recorded channels may be either moving or tracked in
Blind mode. Channel levels controlled by effects are displayed in white.
Except for effect submasters, channel levels controlled by submasters are
displayed in yellow. Channel levels set by channel sliders are displayed in
gold
Release
Use [Rel] to release selected, captured, and independent channels from
the control of the keypad in Stage, Blind or Tracksheet modes. First press
releases any selected channels, second releases captured channels, and
third releases independent channels.
Example: [Channel] [5] [At] [7][5] [Rel] sets channel 5 at 75 percent, then
releases it.
Replace/Insert
Insert/Replace is softkey [S2] in the Macro Editing and Designer’s
Worksheet Editing displays
Press [S2], Insert/Replace, to change the editing mode of the macro dis-
play. Replace Mode overwrites macro entries, and Insert Mode inserts
new entries before the currently selected entry (displayed in yellow.)
Reset Loop
Reset Loop is softkey [S8] after [S7], More Softkeys, in the SMPTE
Events display
Use [S8], Reset Loop, to set the first and last valid SMPTE frames for the
SMPTE program, so that the internal clock can correctly reset to the start-
ing frame.
Reset System
Reset System is softkey [S1] in the Clear Functions display
Use [S1], Reset System, to clear all data from console and reset all set-
tings to factory defaults.
Return
Return is softkey [S8] in numerous displays
Use [S8], Return, to return to the previous display.