User manual

346 Insight 2x user manual
Left Arrow
Use [←] to move through various displays, including Stage, Blind, effects,
subroutines and macros.
Level
Use [Level] to immediately set channels and groups to the default level
assignment determined in the Setup menu.
Example: [Channel] [6] [Level] sets channel 6 to the default level.
Level Wheel
Use the level wheel to proportionally adjust a selected group of channels.
Example: [Channel] [1] [Thru] [5] [Level Wheel] sets the levels for channels
1 through 5.
Example: [Group] [5] [Level Wheel] sets the level on all channels in group
5.
Link
Use [Link] to cause the linked cue to be loaded as the next available cue,
to link a macro execution to a cue or to select a link in the Link List.
Example: [Cue] [1] [Link] [8] links cue 8 to cue 1.
Example: [Cue] [6] [Link] [Enter Macro] [4] [Enter] links macro 4 to cue 6.
Link
Link is softkey [S1] in the Link List display
[S1], Link, allows channels to be simultaneously controlled on the two
wheels. When a channel is accessed, its linked channels are also selected
and may be controlled by the corresponding wheel. A channel may appear
in the link list only once.
Link List
Link List is softkey [S7] in the Channel Attributes display
Use [S7], Link List, to access the Link List display. The Link List lists chan-
nels linked for simultaneous control on the two wheels.
Load Check
Load Check is softkey [S4] in the Load Management display
Use [S4], Load Check, to compare the current load on selected dimmers
with their recorded loads.