User manual

342 Insight 2x user manual
Groups
Insight 2x allows you to record frequently used combinations of channels
into units called groups. Y ou may record up to 500 groups.
Once you record a group, it can be combined with other channels to
create cues, submasters, effects, or other groups. The principal difference
between a group and a cue is that a group cannot be played back through
a fader or slider. Consequently, it has no fade times, wait times or other
playback attributes.
Group numbers are independent of cue numbers and may be numbered
from 1 to 999.
Group
Use [Group] to select, record or recall a proportional group of channels.
Cues and submasters may also be recalled as groups.
Example: [Record] [Group] [1] [Enter] records the current look as group 1.
Example: [Group] [Cue] [3] [at] [5][0] brings up the channels in cue 3 as a
group and sets them to 50 percent of their recorded levels.
Group Editing mode
In Group Editing mode, Insight 2x brings up the selected group itself and
allows you to modify it. In this mode, use [S1], Select Group, rather than
[Group], to bring up a different group. Use [Group] to access a group’s
levels as you modify the selected group.
Group mode
In Group mode, Insight 2x brings up the channels from a group of your
choice and allows you to use them to modify cues and submasters.
Group List
Group List is softkey [S2] in the Blind Group display
Use [S2], Group List, to access the Group List display which provides a
list of recorded groups and their labels
Help
Press [Help], followed by any key to receive a brief description of the key's
function.
Hold
Hold is softkey [S2] in the Sub List display
Press [S2], Hold, when entering Submaster bump button dwell fade
times. Hold causes a faded submaster to stay active until you press the
bump button again. A flashing LED indicates that a submaster is holding.
Hold causes an effect to hold until you press the clear button controlling
the effect to fade the effect out.