User manual

appendix d reference 337
Delete Step
Delete Step is softkey [S6] after [S7], More Softkeys, in the Blind Effect
and Blind Subroutine displays
Press [S6], Delete Step, to delete the selected step or a specified step.
Example: [S6], Delete Step, [4] [Enter] [Enter] deletes step 4. Example:
[S6], Delete Step, [Enter] [Enter] deletes the selected step.
Delete Sub
Delete Sub is softkey [S6] in the Blind Submaster and Sub List displays
Use [S6], Delete Sub, to clear a submaster of its recorded or loaded con-
tents.
Example: [S6], Delete Sub, [Enter] [Enter] unloads the selected submas-
ter.
Example: [Sub List] [S6], Delete Sub, [1] [Thru] [8] [Enter] [Enter] unloads
subs 1 - 8
Dimmer
Use [Dim] to start a dimmer check, park a dimmer, or to change dimmer
patch
assignments.
Example: [Dim] [1] [At] [Full] [Enter] [+] [+] [+] ...
Example: [Park] [Dim] [1] [At] [7][5]
Example: [Patch] [Dim] [6] [Channel] [7] [Enter]
Dimmer Status
Dimmer Status is softkey [S5] in the System Status and Rack Status
displays
Use [S5], Dimmer Status, to Check information about your dimmers,
including size and type, recorded load, firing mode, output curve, rack,
slot, panic mode, and boost.
Disable ETCLink
Disable ETCLink is softkey [S1] in the ETCLink Functions display
Use [S1], Disable ETCLink, to turn off dimmer monitoring. Softkey then
becomes Enable ETCLink.
Disable MIDI
Disable MIDI is softkey [S1] in the Options Settings display
Use [S1], Disable MIDI, to disable either ETC MIDI or MIDI Show Control.
Both MIDI protocols may be enabled at the same time, and are disabled
individually.