User manual

appendix d reference 335
Cue List
Cue List is softkey [S2] in the Blind Cue and Blind Subroutine displays
Use [S2], Cue List, to access the Cue List display, which provides a list of
recorded cues and cue attributes.
Cue steps (subroutine)
There are two types of cue step, crossfade and allfade. The type deter-
mines how the step’s fade runs.
Crossfade
All increasing levels fade during the upfade time; all decreasing levels fade
during the downfade time.
Allfade
All channels in both faders fade to the level set in the allfade step.
Days of week
Days of week is softkey [S3] in the Real Time Programs display
Use [S3], Days of week, to select on which days of the week the real time
program will run.
Decimal point
Use the decimal point [.] to select decimal cue numbers (.1-.9) or decimal
fade times.
Example: [Cue] [5] [.] [1] [Time] [.][5] [Enter] sets the fade time for cue 5.1
to half a second
Delete
Delete is softkey [S6] after [S7], More Softkeys, in the Stage and Fader
displays
Use [S6], Delete, to delete the contents of a cue or group. The keypad
assumes a cue unless otherwise instructed.
Example: [S6], Delete, [6] [Enter] [Enter] deletes cue 6.
Example: [S6], Delete, [Group] [5] [Enter] [Enter] deletes group 5.
Delete Cue
Delete Cue is softkey [S6] in the Blind Cue and Blind Subroutine
displays
Press [S6], Delete Cue, to delete the contents of a selected or specified
cue.
Example: [S6], Delete Cue, [6] [Enter] [Enter] deletes cue 6.
Example: [S6], Delete Cue, [Enter] [Enter] deletes the selected cue.