User manual

334 Insight 2x user manual
Copy Program
Copy Program is softkey [S2] after [S7], More Softkeys, in the Real
Time Programs display
Use [S2], Copy Program, to copy a group of programs. The target time of
the first program in the group must be specified. The original spacing of
subsequent programs is maintained.
Copy Region
Copy Region is softkey [S5] after [S7], More Softkeys, in the Designer’s
Worksheet Editing display
Press [S5], Copy Region, to copy the contents of one region to a second
region. If the destination region is already recorded, the console will
require a confirmation.
Example: [S1], Select Region, [5] [S7], More Softkeys, [S5], Copy
Region, [9] [Enter] [Enter] copies region 5 to region 9.
Crossfade
In a crossfade cue, channel levels that increase fade to their new level in
the assigned upfade time. Channel levels that decrease fade to their new
level in the assigned downfade time. The cue starts when you press [Go].
You may use a wait time to delay the start of the upfade or downfade.
Cue
Use [Cue] to select a cue number.
Example: [Cue] [156.1] selects cue 156.1.
Cue (SMPTE)
Cue is softkey [S3] after [S7], More Softkeys, in the SMPTE Events
display
Use [S3], Cue, to access the cue fields in the SMPTE Events display.
Press once to select the A/B field, twice to select the C/D field.
Cue List
The Cue List appears on the playback display (usually the left monitor).
The Cue List provides a list of cues for the show, including all of the cues’
programmed attributes. In addition, the playback display provides informa-
tion about which cue is active or running and on which fader the cue is run-
ning.
The Cue List on the Playback monitor displays the last two cues played
before the pending cue. If a cue is currently playing, the list shows the last
cue played, the playing cue and then the pending cue. The pending cue
is highlighted in yellow.