User manual

332 Insight 2x user manual
Bump (SMPTE)
Bump is softkey [S5] after [S7], More Softkeys, in the SMPTE Events
display
Use [S5], Bump, to access the submaster bump field in the SMPTE
Events display.
Bump Status
Bump Status is softkey [S1] in the Blind Submaster displays
Use [S1], Bump Status, to change the function of the submaster bump
button. Choices are: enabled, disabled or solo
Example: [S1], Bump Status, [2] [Enter] disables the bump button of the
selected submaster
Calibrate
[Calibrate] is a region on the Designer’s Worksheet. Whenever you install
a new template on the digitizer tablet, use [Calibrate] to line up the keys
and regions correctly. Using the digitizer pen, touch the region labeled
Calibrate or touch [F1]. Then follow the directions on the screen that
instruct you to touch the pen to the regions labeled A, B and C.
Cancel
Cancel is softkey [S7] in the Load Management display
Use [S7], Cancel, to interrupt a Record Loads operation that has already
started.
Captured channels
Captured channels are channels that you have selected and are live on
stage . They remain live until you press [Rel] to release them . Captured
channels override all other channel settings. For example, if a channel
is in a fader at 100 percent and you capture it and set it to 50 percent,
Insight 2x sets the captured channel at 50 percent. Press [Rel] twice to
release captured channels.
Channel
Use [Channel] to select a channel or group of channels. Use of this key is
often optional.
Example: [Channel] [1] [Thru] [9] [Except] [4] [At] [7][5] sets channels 1
through 3 and 5 through 9 to 75 percent.
Clear (keypad)
Use [Clear] to clear the current keypad entry. Press twice to clear all
entries.
Example: [Channel] [5] [Clear] [8] [Enter] selects channel 8.