User manual

330 Insight 2x user manual
A
A is softkey [S2] in the Patch, Park and ETCLink Functions displays
[S2], A, allows selection of the A output of a multiplex dimmer.
Example: [Patch] [Dimmer] [1] [S2], A, [Channel] [6] [Enter] patches the A
half of multiplex dimmer 1’s output to channel 6.
Allfade
An allfade cue forces all unused channels to zero intensity when you press
[Go] and clears the other fader. Allfade is useful for forcing an end cue
when tracking channels .
Alphanumeric keys
Use the optional alphanumeric keyboard to label cues, groups or submas-
ters and to name shows.
Alternate
Alternate is softkey [S2] in the Attribute list of the Effect display
Use [S2], Alternate, to program an effect that changes between positive
and negative on each pass through the steps. If the effect is positive, the
first pass will be positive, the second negative, the third positive, etc. If
the effect is negative, the first pass will be negative, the second positive,
etc. To cancel the Alternate attribute, press [S2] again.
And
Use [And] to select more than one dimmer, group or channel in a single
statement.
Example: [Channel] [1] [And] [5] [And] [8] [At] [7][5] sets channels 1, 5 and
8 at 75 percent.
At
Use [At] to enter the intensity for a selected dimmer, channel or group.
Example: [Channel] [1] [And] [4] [At] [4][5] sets channels 1 and 4 at 45 per-
cent.
Attribute
Attribute is softkey [S8] after [S7], More Softkeys, in the Effect display
Use [S8], Attribute, to access the effect attribute selection softkeys.