User manual

18 Insight 2x user manual
Setting default Level
Insight 2x allows you to assign a value to the [Level] key. The default value
is 100 percent. You may assign [Level] any value between zero and 100.
Follow these steps to assign a value to [Level]:
Note: To enter a level between one and nine percent, you must press zero
then the number. For example, to set the default level to five percent,
press [0][5] in step 4.
Setting default fader clear time
Pressing the [Clear] key above one of the fader pairs clears the cue from
the fader, fading all channels in that fader to zero. The default fader clear
time determines the fade time for both [Clear] keys. Channels black out
immediately when clear time is zero.
Fade times may be expressed in minutes and seconds, or as fractions of
seconds (in decimal format). Fade times can be programmed from .1
second to 99:59 minutes. Acceptable time values include: .2 (.2 seconds),
00:12 (12 seconds), 5.5 (5.5 seconds), or 5:30 (five minutes, 30 seconds).
Follow these steps to set a new default fade time:
Keystrokes:
Action:
1. Press [Setup].
Selects Setup display
2. Select [1], System Set-
tings, and press [Enter].
Selects System Settings menu
3. Select [4], Default Level,
and press [Enter].
Prompt reads:
Enter default level
(Press FULL button for 100%)
4. Use the keypad to enter
the two-digit value (00-99)
you wish to assign to
[Level], or press [Full].
New default for [Level] is set
Keystrokes:
Action:
1. Press [Setup].
Selects Setup display
2. Select [1], System Set-
tings, and press [Enter].
Selects System Settings menu
3. Select [5], Default Fader
Clear Time, and press
[Enter].
Prompt reads:
Enter default fader clear time
4. Press [9] to enter the time
value you wish to assign.
Corner reads:
Time 9
5. Press [Enter].
New default time is set to nine
seconds