User manual

282 Insight 2x user manual
Parking groups, cues and submasters
Groups, cues and submasters are collections of channels with associated
control instructions. Insight 2x allows you to park the channels used in
groups, cues and submasters at a specified level, ignoring their recorded
levels. For example, if all your worklights are recorded in a group, you
could park that group, rather than parking all of the worklight channels indi-
vidually.
Park a group
To park the channels in a group, follow these steps:
Park a cue or submaster
To park the channels used in a cue or submaster follow these steps,
pressing either [Cue] or [Sub], respectively, in step 2:
Keystrokes:
Action:
1. Press [Stage].
Selects Live display
2. Press [S6], Park, [Group].
Prompt reads:
Group mode - Select group number,
then press AT to park, or press
Release to unpark
3. Enter the group number
and press [At].
Selects the group to park
Prompt reads:
Group mode - Enter intensity
4. Enter the level at which to
park the group’s channel.
Parks the channels at the selected
level
Keystrokes:
Action:
1. Press [Stage].
Selects Live display
2. Press [S6], Park, [Cue].
Prompt reads:
Group mode - Select cue number to
use as group, then press AT to park,
or press Release to unpark
3. Enter the cue number and
press [At].
Selects the cue to park
Prompt reads:
Group mode - Enter intensity
4. Enter the level at which to
park the cue’s channel.
Parks the channels at the selected
level