User manual

chapter 3 system settings 17
Setting default fade times
Insight 2x allows you to assign default upfade and downfade times to
cues or to control fade times manually. Default fade times are five sec-
onds.
Fade times may be expressed in minutes and seconds, or as fractions of
seconds (in decimal format). Fade times can be programmed from .1
second to 99:59 minutes. Acceptable time values include: .2 (.2 seconds),
00:12 (12 seconds), 5.5 (5.5 seconds), or 5:30 (five minutes, 30 seconds).
Follow these steps to assign your desired fade times:
Note: If the upfade and downfade times are the same, both will change
when you change the upfade time.
Keystrokes:
Action:
1. Press [Setup].
Selects Setup display
2. Select [1], System Settings,
and press [Enter].
Selects System Settings menu
3. Select [3], Default Fade
Time, and press [Enter].
Prompt reads:
Enter default up fadetime
4. Press [6] to enter a six second
upfade time.
Corner reads:
UpTime 6
5. Press [Enter].
Prompt reads:
Enter default down fadetime
6. Press [3] to enter a three
second downfade time.
Corner reads:
DnTime 3
7. Press [Enter].
Fade times are reset