User manual

274 Insight 2x user manual
Moving a link
Use [S7], Move Link, to renumber a link or a group of links. All links in a
group will be renumbered sequentially.
To move a link to an empty space on the Link List, follow these steps:
Note: If you move a link to a space on the Link List which already contains
a link, the channels in the moved link are added to the existing link. See
Merging two links on page 275 for more information.
Keystrokes:
Action:
1. Press [Setup] [1][1] [Enter].
Selects Channel Attributes display
2. Press [S7], Link List.
Selects Link List display
Prompt reads:
Select link number
3. Press [S7], Move Link.
Prompt reads:
Select link number(s) to move, then
press ENTER
To cancel, press CLEAR.
4. Press [6] [Enter].
Prompt reads:
To move selected link(s), select
target link and press ENTER
To cancel, press CLEAR
5. Press [9] [Enter]
Link 6 is renumbered as link 9