User manual

16 Insight 2x user manual
Setting number of dimmers
One of the first steps in configuring Insight 2x is to enter the number
of dimmers in your system. Insight 2x defaults to 1,536 dimmers, the
maximum number of dimmers the console can address.
Follow these steps to select up to 1,536 dimmers:
Note: If you increase the number of dimmers, the additional dimmers are
initially patched to channel zero. From there, you can assign them to the
channel of your choice.
Setting number of channels
Insight 2x allows you to control your dimmers with control channels.
Insight 2x defaults to 324 channels, the maximum number of channels the
console can address.
Follow these steps to select the number of channels:
Keystrokes:
Action:
1. Press [Setup].
Selects Setup display
2. Select [1], System Set-
tings, and press [Enter].
Selects System Settings menu
3. Select [1], Number of
Dimmers, and press
[Enter].
Prompt reads:
Select number of dimmers,
then press ENTER
4. Press [8][0][0] to enter the
desired number of dim-
mers.
Corner reads:
Dim 800
5. Press [Enter].
Number of dimmers is set to
800
Keystrokes:
Action:
1. Press [Setup].
Selects Setup display
2. Select [1], System Set-
tings, and press [Enter].
Selects System Settings menu
3. Select [2], Number of
Channels, and press
[Enter].
Prompt reads:
Select number of channels,
then press ENTER
4. Press [4][5] to enter the
desired number of chan-
nels.
Corner reads:
Chan 45
5. Press [Enter].
Number of channels is set to 45