User manual

266 Insight 2x user manual
Link List overview
Press [Setup] [1][1], Channel Attributes, [Enter] [S7], Link List, to reach
the Link List display.
When two or more channels are used together, such as the pan and tilt
channels for a moving light, the Link List allows you to determine which
of the wheels will control each channel. Other channels that might com-
monly be linked include color and intensity channels for a color scroller or
gobo and rotation rates.
A link allows channels to be simultaneously controlled on the two wheels.
When you select a channel, it is placed under the control of one of the
wheels and all channels linked to it are also selected and placed under
control of the other wheel.
Links may contain up to ten channels on each of the X and Y lists. All chan-
nels in a link from one list are selected if any channel is selected from the
other list.
Note: Each channel may appear in only one link.
All channels on the X list are controlled by the X wheel; channels on the Y
list are controlled by the Y wheel.
Channels that control movement of moving lights or color scrollers will
often be set as Independent. This assures that in the case of a blackout or
Grandmaster movement, the current position of the moving light will not
change. For more information about Independent channels, see page 46.