User manual

262 Insight 2x user manual
Remote macros
The Remote macro feature provides the ability to access up to 8 macros
from locations up to 1000 feet from the main console. Typically the
Remote Macro control device is an eight button control station.
The remote macro outputs control macros 1,901 through 1,908. To run
one of these macros from a remote location, press the appropriate con-
trol.
ETC does not provide remote macro units. However, the console does
provide a 25-pin connector labeled Remote Go to which you may attach
a user-supplied, remote macro control device. See Installing remote
macros
on page 318 for more information about installing remote macros.
Note: The Insight 2x Lighting Playback Controller provides four Remote
Macro connectors, for a total of 32 remote macros. These are each equiv-
alent to the single connector described above. These remote macro out-
puts control macros 1,901 through 1,932.