User manual

260 Insight 2x user manual
Internal SMPTE clock
To run the SMPTE program using the internal clock, follow these steps:
Keystrokes:
Actions:
1. Press [Setup].
Selects Setup display
2. Press [1][3], SMPTE
Events, and press [Enter].
Selects SMPTE Events display mode
3. Press [S1], Internal Clock.
Prompt reads:
Set SMPTE internal clock, then
press ENTER (Press TIME to edit
specific fields)
4. Use the keypad or the [+]
and [–] keys to enter the
SMPTE time of the first
event you want to view, or
enter zero to start at the
beginning of the SMPTE
program.
5. Press [Enter].
6. Press [S2], Clock Enable,
to start the internal clock
running at the desired
SMPTE time.
Each SMPTE event will run at its
recorded time